��������-�������

HOMEPAGE

ABOUT THE METHOD

SOFTWARE FEATURES

BENEFITS SOFTWARE

DOWNLOAD

WHAT'S NEW

 

Examples of Processing Results:

Hidden Defects in Concrete

Pipe Detection

Pile Foundation Grillage

Engineering Geology

Railroads

Building Control

Municipal Engineering

Non-destructive Testing

Air Voids in the Soil

Illegal Tie-in Into Oil Pipeline

Archeology

Relief Map

3D Processing

Certificate:

Certificate of state registration program GEORADAR-EXPERT

Publications:

��������� 4 2010 �������

��� 2011

������ � ������ ������� �6 2015 ��� 73-78

������� ��� ���

���� ����. ������ 56, 2015 �.


 

POSITION OF PILES IN PILE FOUNDATION GRILLAGE

This georadar survey of the pile foundation grillage was performed in order to determine the actual position of the reinforced concrete piles. The thickness of the reinforced concrete grillage is about 1 meter. During the investigation, the antenna unit of the georadar with a center frequency of 400 MHz probing pulses moved along the horizontal surface of the grillage.

Figure 1 shows the grillage scheme. The design position of the piles in the drawing is marked by black square markers. The direction of movement of the georadar is indicated by a purple arrow.

georadar piles

Fig.1

Figure 2 shows the result of processing this georadar profile in the GEORADAR-EXPERT software. The position of the piles on the section corresponds to the position of the light-violet vertical strips passing through the entire section from top to bottom.

georadar piles

Fig.2

It is necessary to understand, the method of georadiolocation can only find out the number of piles in the grillage and determine their position. It is difficult to determine the length of the piles with the aid of a georadar.

 

© Denisov Roman 2009-2017

  �������@Mail.ru